List of International Organization for Standardization standards

This is a list of current, published^{[Note 1]} International Organization for Standardization (ISO) standards and other deliverables.^{[Note 2]} For a complete and up-to-date list of all the ISO standards (at least 19 000,^[1] as of January 2012), see the ISO catalogue.^[2]

The standards are copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.^[3]

This is an incomplete list, which may never be able to satisfy particular standards for completeness. You can help by expanding it with reliably sourced entries.

ISO 1–ISO 999

• ISO 1:2002 Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification
• ISO 2:1973 Textiles — Designation of the direction of twist in yarns and related products
• ISO 3:1973 Preferred numbers — Series of preferred numbers
• ISO 4:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications
• ISO 5 Photography and graphic technology — Density measurements
  • ISO 5-1:2009 Geometry and functional notation
  • ISO 5-2:2009 Geometric conditions for transmittance density
  • ISO 5-3:2009 Spectral conditions
  • ISO 5-4:2009 Geometric conditions for reflection density
• ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
• ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 7-1:1994 Dimensions, tolerances and designation
  • ISO 7-2:2000 Verification by means of limit gauges
• ISO 8:1977 Documentation — Presentation of periodicals
• ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
• ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins
• ISO 12:1987 Aerospace — Pipelines — Identification
• ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
• ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
• ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
• ISO 18 Documentation — Contents list of periodicals
• ISO 31 Quantities and units [withdrawn]
• ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
• ISO 68 ISO general-purpose screw threads — Basic profile
  • ISO 68-1:1998 Metric screw threads
  • ISO 68-2:1998 Inch screw threads
• ISO 128:1982 Technical drawings — General principles of presentation (withdrawn 2001-04-17)
• ISO 216:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction
• ISO 226:2003 Acoustics — Normal equal-loudness-level contours
• ISO 228 Pipe threads where pressure-tight joints are not made on the threads
  • ISO 228-1:2000 Dimensions, tolerances and designation
  • ISO 228-2:1987 Verification by means of limit gauges
• ISO 233 Information and documentation — Transliteration of Arabic characters into Latin characters^{[Note 3]}
  • ISO 233-2:1993 Arabic language — Simplified transliteration
  • ISO 233-3:1999 Persian language — Simplified transliteration
• ISO 259 Information and documentation — Transliteration of Hebrew characters into Latin characters^{[Note 3]}
  • ISO 259-2:1994 Simplified transliteration
• ISO 261 ISO general purpose metric screw threads — General plan
• ISO 262 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
• ISO 361 Basic ionizing radiation symbol
• ISO 500 Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3
• ISO 518:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
• ISO 519:1992 Photography — Hand-held cameras — Flash-connector dimensions
• ISO 639 Codes for the representation of names of languages
  • ISO 639-1 Alpha-2 code
  • ISO 639-2 Alpha-3 code
  • ISO 639-3 Alpha-3 code for comprehensive coverage of languages
  • ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
  • ISO 639-5 Alpha-3 code for language families and groups
  • ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
• ISO/IEC 646 Information technology — ISO 7-bit coded character set for information interchange
• ISO 657 Hot-rolled steel sections
• ISO 668 Series 1 freight containers — Classification, dimensions and ratings
• ISO 690 Information and documentation — Guidelines for bibliographic references and citations to information resources
• ISO 704 Terminology work — Principles and methods
• ISO 732 Photography — 120-size and 220-size films — Dimensions
• ISO 764 Horology — Magnetic resistant watches
• ISO 838 Paper — Holes for general filing purposes — Specifications
• ISO 843:1997 Information and documentation — Conversion of Greek characters into Latin characters
• ISO 860 Terminology work — Harmonization of concepts and terms
• ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel^{[Note 3]}
  • ISO 898-1 Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
  • ISO 898-2 Nuts with specified proof load values — Coarse thread
  • ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
  • ISO 898-6 Nuts with specified proof load values — Fine pitch thread
  • ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
• ISO 965 ISO general purpose metric screw threads — Tolerances
  • ISO 965-1 Principles and basic data
  • ISO 965-2 Limits of sizes for general purpose external and internal screw threads — Medium quality
  • ISO 965-3 Deviations for constructional screw threads
  • ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
  • ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
• ISO 999 Information and documentation — Guidelines for the content, organization, and presentation of indexes

ISO 1000–ISO 9999

• ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
• ISO 1004 Information processing — Magnetic ink character recognition — Print specifications
• ISO 1007 Photography — 135-size film and magazine — Specifications
• ISO/IEC 1539 Information technology — Programming languages — Fortran
• ISO 1222 Photography — Tripod connections
• ISO 1629 Rubber and latices — Nomenclature
• ISO 1745 Information processing — Basic mode control procedures for data communication systems
• ISO 1750 Pesticides and other agrochemicals — Common names
• ISO/IEC 2022 Information technology — Character code structure and extension techniques
• ISO 2108 Information and documentation — International standard book number (ISBN)
• ISO 2145 Documentation — Numbering of divisions and subdivisions in written documents
• ISO 2162 Technical product documentation — Springs
  • ISO 2162-1 Simplified representation
  • ISO 2162-2 Presentation of data for cylindrical helical compression springs
• ISO 2171 Cereals, pulses and by-products — Determination of ash yield by incineration
• ISO 2240:2003 Photography — Colour reversal camera films — Determination of ISO speed
• ISO 2533 Standard Atmosphere
• ISO 2709 Information and documentation — Format for information exchange
• ISO 2768 General tolerances
  • ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
  • ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
• ISO 2852 Stainless steel clamp pipe couplings for the food industry
• ISO 3082 Iron ores — Sampling and sample preparation procedures
• ISO 3098 Technical product documentation — Lettering
• ISO 3103 Tea — Preparation of liquor for use in sensory tests
• ISO 3166 Codes for the representation of names of countries and their subdivisions
  • ISO 3166-1 Country codes
  • ISO 3166-2 Country subdivision code
  • ISO 3166-3 Code for formerly used names of countries
• ISO 3297 Information and documentation — International standard serial number (ISSN)
• ISO 3394 Dimensions of rigid rectangular packages — Transport packages
• ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
• ISO 3536 Road vehicles — Safety glazing materials — Vocabulary
• ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests
• ISO 3538 Road vehicles — Safety glazing materials — Test methods for optical properties
• ISO 3601 Fluid power systems — O-rings
  • ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
  • ISO 3601-2 Housing dimensions for general applications
  • ISO 3601-3 Quality acceptance criteria
  • ISO 3601-4 Anti-extrusion rings (back-up rings)
  • ISO 3601-5 Suitability of elastomeric materials for industrial applications
• ISO 3602 Documentation — Romanization of Japanese (kana script)
• ISO 3632 Spices — Saffron (Crocus sativus L.)^{[Note 3]}
• ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
• ISO 3676 Packaging — Unit load sizes — Dimensions
• ISO 3864 Graphical symbols — Safety colours and safety signs
• ISO 3901 Information and documentation — International Standard Recording Code (ISRC)
• ISO 3977 Gas turbines — Procurement
• ISO 4074 Natural latex rubber condoms — Requirements and test methods
• ISO 4157 Construction drawings — Designation systems
  • ISO 4157-1 Buildings and part of buildings
  • ISO 4157-2 Room names and numbers
  • ISO 4157-3 Room identifiers
• ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
• ISO 4217 Codes for the representation of currencies and funds
• ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance
  • ISO 4628-1 General introduction and designation system
  • ISO 4628-2 Assessment of degree of blistering
  • ISO 4628-3 Assessment of degree of rusting
  • ISO 4628-4 Assessment of degree of cracking
  • ISO 4628-5 Assessment of degree of flaking
  • ISO 4628-6 Assessment of degree of chalking by tape method
  • ISO 4628-7 Assessment of degree of chalking by velvet method
  • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
  • ISO 4628-10 Assessment of degree of filiform corrosion
• ISO/IEC 4873:1991 Information technology — ISO 8-bit code for information interchange — Structure and rules for implementation
• ISO 4892 Plastics — Methods of exposure to laboratory light sources
• ISO 5127 Information and documentation — Vocabulary
• ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
  • ISO 5167-1 General principles and requirements
  • ISO 5167-2 Orifice plates
  • ISO 5167-3 Nozzles and Venturi nozzles
  • ISO 5167-4 Venturi tubes
• ISO/IEC 5218 Information technology — Codes for the representation of human sexes
• ISO 5455 Technical drawings — Scales
• ISO 5457 Technical product documentation — Sizes and layout of drawing sheets
• ISO 5775 Bicycle tires and rims
• ISO 5800:2001 Photography — Colour negative films for still photography — Determination of ISO speed
• ISO 5964 Documentation — Guidelines for the establishment and development of multilingual thesauri
• ISO 5971:1981 Size designation of clothes — Pantyhose
• ISO 6166 Securities and related financial instruments — International securities identification numbering system (ISIN)
• ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
  • ISO 6194-5 Identification of visual imperfections
• ISO 6336 Calculation of load capacity of spur and helical gears
• ISO 6344 Coated abrasives — Grain size analysis
  • ISO 6344-1 Grain size distribution test
  • ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220
  • ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500
• ISO/IEC 6429 Information technology — Control functions for coded character sets
• ISO 6438 Documentation — African coded character set for bibliographic information interchange
• ISO 6579 Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Salmonella spp.
• ISO 6594 Cast iron drainage pipes and fittings — Spigot series
• ISO 6709 Standard representation of geographic point location by coordinates
• ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
• ISO 7001 Graphical symbols — Public information symbols
• ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
• ISO 7098 Information and documentation — Romanization of Chinese
• ISO 7200 Technical product documentation — Data fields in title blocks and document headers
• ISO 7240 Fire detection and alarm systems
• ISO 7372 Trade data interchange
• ISO/IEC 7501 Identification cards — Machine readable travel documents
  • ISO/IEC 7501-1:2008 Machine readable passport
  • ISO/IEC 7501-2:1997 Machine readable visa
  • ISO/IEC 7501-3:2005 Machine readable official travel documents
• ISO 7736 Road vehicles — Car radio for front installation — Installation space including connections
• ISO/IEC 7810 Identification cards — Physical characteristics
• ISO/IEC 7811 Identification cards — Recording technique
• ISO/IEC 7812 Identification cards — Identification of issuers
• ISO/IEC 7813 Information technology — Identification cards — Financial transaction cards
• ISO/IEC 7816 Identification cards — Integrated circuit cards^{[Note 3]}
• ISO/IEC 7942 Information technology — Computer graphics and image processing — Graphical Kernel System (GKS)
• ISO 8000 Data quality
• ISO 8090 Cycles — Terminology
• ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
• ISO 8373 Manipulating industrial robots — Vocabulary
• ISO 8501 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness
• ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
• ISO 8583 Financial transaction card originated messages — Interchange message specifications
  • ISO 8583-1 Messages, data elements and code values
  • ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
  • ISO 8583-3 Maintenance procedures for messages, data elements and code values
• ISO 8601 Data elements and interchange formats — Information interchange — Representation of dates and times
• ISO/IEC 8613 Information technology — Open Document Architecture (ODA) and interchange format
• ISO/IEC 8632 Information technology — Computer graphics — Metafile for the storage and transfer of picture description information
• ISO 8651 Information technology — Computer graphics — Graphical Kernel System (GKS) language bindings^{[Note 3]}
• ISO/IEC 8652 Information technology — Programming languages — Ada
• ISO 8653:1986 Jewellery — Ring-sizes — Definition, measurement and designation
• ISO 8691 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
• ISO 8805 Information processing systems — Computer graphics — Graphical Kernel System for Three Dimensions (GKS-3D) functional description
• ISO/IEEC 8806 Information technology — Computer graphics — Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
  • ISO/IEEC 8806-4 C
• ISO 8807 Information processing systems — Open Systems Interconnection — LOTOS — A formal description technique based on the temporal ordering of observational behaviour
• ISO/IEC 8824 Information technology — Abstract Syntax Notation One (ASN.1)
• ISO/IEC 8825 Information technology — ASN.1 encoding rules
• ISO/IEC 8859 Information technology — 8-bit single-byte coded graphic character sets
  • ISO/IEC 8859-1 Latin alphabet No. 1
  • ISO/IEC 8859-2 Latin alphabet No. 2
  • ISO/IEC 8859-3 Latin alphabet No. 3
  • ISO/IEC 8859-4 Latin alphabet No. 4
  • ISO/IEC 8859-5 Latin/Cyrillic alphabet
  • ISO/IEC 8859-6 Latin/Arabic alphabet
  • ISO/IEC 8859-7 Latin/Greek alphabet
  • ISO/IEC 8859-8 Latin/Hebrew alphabet
  • ISO/IEC 8859-9 Latin alphabet No. 5
  • ISO/IEC 8859-10 Latin alphabet No. 6
  • ISO/IEC 8859-11 Latin/Thai alphabet
  • ISO/IEC 8859-13 Latin alphabet No. 7
  • ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
  • ISO/IEC 8859-15 Latin alphabet No. 9
  • ISO/IEC 8859-16 Latin alphabet No. 10
• ISO 8879 Information processing — Text and office systems — Standard Generalized Markup Language (SGML)
• ISO 9000 Quality management systems — Fundamentals and vocabulary
• ISO 9001 Quality management systems — Requirements
• ISO 9069 Information processing — SGML support facilities — SGML Document Interchange Format (SDIF)
• ISO/IEC 9075 Information technology — Database languages — SQL
• ISO/IEC 9126 Software engineering — Product quality
• ISO 9141 Road vehicles — Diagnostic systems^{[Note 3]}
  • ISO 9141-2 [California Air Resources Board|CARB] requirements for interchange of digital information
  • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
• ISO 9241 Ergonomics of human-system interaction
• ISO 9362 Banking — Banking telecommunication messages — Business identifier code (BIC)
• ISO 9407 Shoe sizes — Mondopoint system of sizing and marking
• ISO/IEC 9541 Information technology — Font information interchange
  • ISO/IEC 9541-1:1991 Architecture
  • ISO/IEC 9541-2:1991 Interchange Format
  • ISO/IEC 9541-3:1994 Glyph shape representation
  • ISO/IEC 9541-4:2009 Harmonization to Open Font Format
• ISO 9564 Financial services — Personal Identification Number (PIN) management and security^{[Note 3]}
• ISO/IEC 9579 Information technology — Remote database access for SQL with security enhancement
• ISO/IEC 9592 Information technology — Computer graphics and image processing — Programmer's Hierarchical Interactive Graphics System (PHIGS)
• ISO/IEC 9593 Information technology — Computer graphics — Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings^{[Note 3]}
• ISO/IEC 9594 Information technology — Open Systems Interconnection — The Directory
• ISO 9660 Information processing — Volume and file structure of CD-ROM for information interchange
• ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
• ISO/IEC 9797 Information technology — Security techniques — Message Authentication Codes (MACs)
  • ISO/IEC 9797-1 Mechanisms using a block cipher
  • ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
• ISO/IEC 9798 Information technology — Security techniques — Entity authentication
• ISO/IEC 9834 Information technology — Open Systems Interconnection — Procedures for the operation of OSI Registration Authorities
• ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
• ISO/IEC 9899 Programming languages — C
• ISO/IEC/IEEE 9945 Information technology — Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
• ISO 9984 Information and documentation — Transliteration of Georgian characters into Latin characters
• ISO 9985 Information and documentation — Transliteration of Armenian characters into Latin characters
• ISO 9992 Financial transaction cards — Messages between the integrated circuit card and the card accepting device
• ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems
• ISO 9999 Assistive products for persons with disability — Classification and terminology

ISO 10000–ISO 19999

• ISO 10006 Quality management systems — Guidelines for quality management in projects
• ISO 10007 Quality management systems — Guidelines for configuration management
• ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
• ISO/IEC 10021 Information technology — Message Handling Systems (MHS)
• ISO/IEC 10026 Information technology — Open Systems Interconnection
• ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
• ISO/IEC 10089 Information technology — 130 mm rewritable optical disk cartridge for information interchange
• ISO/IEC 10116 Information technology — Security techniques — Modes of operation for an n-bit block cipher
• ISO/IEC 10118 Information technology — Security techniques — Hash-functions
• ISO 10160 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition
• ISO 10161 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification
• ISO/IEC 10164 Information technology — Open Systems Interconnection — Systems Management
• ISO/IEC 10179:1996 Information technology — Processing languages — Document Style Semantics and Specification Language (DSSSL)
• ISO/IEC 10206 Information technology — Progamming languages — Extended Pascal
• ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
• ISO 10218 Robots and robotic devices — Safety requirements for industrial robots
• ISO/IEC 10279 Information technology — Programming languages — Full BASIC
• ISO 10303 Industrial automation systems and integration — Product data representation and exchange
• ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
• ISO 10487 Passenger cars — Connections for car radios^{[Note 3]}
• ISO 10628 Flow diagrams for process plants
• ISO/IEC 10646 Information technology — Universal Coded Character Set (UCS)
• ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
• ISO 10957 Information and documentation — International standard music number (ISMN)
• ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
• ISO 10993 Biological evaluation of medical devices
  • ISO 10993-1 Evaluation and testing within a risk management process
  • ISO 10993-2 Animal welfare requirements
  • ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
  • ISO 10993-4 Selection of tests for interactions with blood
  • ISO 10993-5 Tests for in vitro cytotoxicity
  • ISO 10993-6 Tests for local effects after implantation
  • ISO 10993-7 Ethylene oxide sterilization residuals
  • ISO 10993-9 Framework for identification and quantification of potential degradation products
  • ISO 10993-10 Tests for irritation and skin sensitization
  • ISO 10993-11 Tests for systemic toxicity
  • ISO 10993-12 Sample preparation and reference materials
  • ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
  • ISO 10993-14 Identification and quantification of degradation products from ceramics
  • ISO 10993-15 Identification and quantification of degradation products from metals and alloys
  • ISO 10993-16 Toxicokinetic study design for degradation products and leachables
  • ISO 10993-17 Establishment of allowable limits for leachable substances
  • ISO 10993-18 Chemical characterization of materials
  • ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
  • ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
• ISO 11064 Ergonomic design of control centres
  • ISO 11064-1:2000 Principles for the design of control centres
  • ISO 11064-2:2000 Principles for the arrangement of control suites
  • ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
  • ISO 11064-4:2004 Layout and dimensions of workstations
  • ISO 11064-5:2008 Displays and controls
  • ISO 11064-6:2005 Environmental requirements for control centres
  • ISO 11064-7:2006 Principles for the evaluation of control centres
• ISO 11137 Sterilization of health care products — Radiation
• ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
• ISO/IEC 11172 Information technology — Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
• ISO/IEC 11179 Information technology — Metadata registries (MDR)
  • ISO/IEC 11179-1:2004 Framework
  • ISO/IEC 11179-2:2005 Classification
  • ISO/IEC 11179-3:2003 Registry metamodel and basic attributes
  • ISO/IEC 11179-4:2004 Formulation of data definitions
  • ISO/IEC 11179-5:2005 Naming and identification principles
  • ISO/IEC 11179-6:2005 Registration
• ISO/IEC 11404 Information technology — General-Purpose Datatypes (GPD)
• ISO 11446:2004 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
• ISO 11469:2000 Plastics — Generic identification and marking of plastics products
• ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
• ISO 11783 Tractors and machinery for agriculture and forestry — Serial control and communications data network
• ISO/IEC 11801 Information technology — Generic cabling for customer premises
• ISO 11898 Road vehicles — Controller area network (CAN)
• ISO 12006 Building construction — Organization of information about construction works
• ISO/IEC 12207 Systems and software engineering — Software life cycle processes
• ISO 12639 Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT)
• ISO 12641 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration
• ISO/TS 12805:2011 Nanotechnologies — Materials specifications — Guidance on specifying nano-objects
• ISO/TR 13121:2011 Nanotechnologies — Nanomaterial risk evaluation
• ISO 13239 Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures
• ISO/IEC 13249 Information technology — Database languages — SQL multimedia and application
• ISO/IEC 13250 Information technology — Topic Maps^{[Note 3]}
• ISO/IEC 13346 Information technology — Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
• ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
• ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
• ISO 13450 Photography — 110-size cartridge, film and backing paper — Dimensions
• ISO 13485:2003 Medical devices — Quality management systems — Requirements for regulatory purposes
• ISO/IEC 13490 Information technology — Volume and file structure of read-only and write-once compact disk media for information interchange
• ISO 13567 Technical product documentation — Organization and naming of layers for CAD
• ISO/IEC 13568:2002 Information Technology — Z formal specification notation — Syntax, type system and semantics
• ISO 13616 Financial services — International bank account number (IBAN)
• ISO 13628 Petroleum and natural gas industries — Design and operation of subsea production systems
  • ISO 13628-1 General requirements and recommendations
  • ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
  • ISO 13628-3 Through flowline (TFL) systems
  • ISO 13628-4 Subsea wellhead and tree equipment
  • ISO 13628-5 Subsea umbilicals
  • ISO 13628-6 Subsea production control systems
  • ISO 13628-7 Completion/workover riser systems
  • ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
  • ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
  • ISO 13628-10 Specification for bonded flexible pipe
  • ISO 13628-11 Flexible pipe systems for subsea and marine applications
• ISO 13849 Safety of machinery — Safety related parts of control systems
• ISO/IEC 13818 Information technology — Generic coding of moving pictures and associated audio information
• ISO 13837 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
• ISO 14001 Environmental management systems — Requirements with guidance for use
• ISO 14064 Greenhouse gases
• ISO 14155:2011 Clinical investigation of medical devices for human subjects — Good clinical practice
• ISO 14223 Radiofrequency [sic] identification of animals — Advanced transponders
• ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
  • ISO 14230-1 Physical layer
  • ISO 14230-2 Data link layer
  • ISO 14230-3 Application layer
  • ISO 14230-4 Requirements for emission-related systems
• ISO/IEC 14443 Identification cards — Contactless integrated circuit cards — Proximity cards
• ISO/IEC 14496 Information technology — Coding of audio-visual objects
• ISO 14644 Cleanrooms and associated controlled environments
  • ISO 14644-1:1999 Classification of air cleanliness
  • ISO 14644-2:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
  • ISO 14644-3:2005 Test methods
  • ISO 14644-4:2001 Design, construction and start-up
  • ISO 14644-5:2004 Operations
  • ISO 14644-6:2007 Vocabulary
  • ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
  • ISO 14644-8:2006 Classification of airborne molecular contamination
• ISO/IEC 14651 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
• ISO 14698 Cleanrooms and associated controlled environments — Biocontamination control
  • ISO 14698-1 General principles and methods
  • ISO 14698-2 Evaluation and interpretation of biocontamination data
• ISO/IEC 14750 Information technology — Open Distributed Processing — Interface Definition Language
• ISO/IEC 14755 Information technology — Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
• ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide
• ISO 14855-1:2005 General method
• ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
• ISO/IEC 14882 Programming Languages — C++
• ISO 14915 Software ergonomics for multimedia user interfaces
  • ISO 14915-1:2002 Design principles and framework
  • ISO 14915-2:2003 Multimedia navigation and control
  • ISO 14915-3:2002 Media selection and combination
• ISO 14971:2007 Medical devices — Application of risk management to medical devices
• ISO/IEC 14977 Information technology — Syntactic metalanguage — Extended BNF
• ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
  • ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification (ebCPP)
  • ISO/TS 15000-2:2004 Message service specification (ebMS)
  • ISO/TS 15000-3:2004 Registry information model specification (ebRIM)
  • ISO/TS 15000-4:2004 Registry services specification (ebRS)
  • ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version 2.01(ebCCTS)
• ISO 15022 Securities — Scheme for messages (Data Field Dictionary)
• ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials
• ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
• ISO 15112 Natural gas — Energy determination
• ISO 15189 Medical laboratories — Particular requirements for quality and competence
• ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
• ISO/IEC 15288 Systems and software engineering — System life cycle processes
• ISO/IEC 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
• ISO/IEC 15291 Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
• ISO 15403 Natural gas — Natural gas for use as a compressed fuel for vehicles
  • ISO 15403-1 Designation of the quality
• ISO/IEC 15408 Information technology — Security techniques — Evaluation criteria for IT security
• ISO/IEC 15434 Information technology — Automatic identification and data capture techniques — Syntax for high-capacity ADC media
• ISO/IEC 15444 Information technology — JPEG 2000 image coding system
• ISO/IEC 15445:2000 Information technology — Document description and processing languages — HyperText Markup Language (HTML)
• ISO 15489-1:2001 Information and documentation — Records management — Part 1: General
• ISO/TR 15489-2:2001 Information and documentation — Records management — Part 2: Guidelines
• ISO/IEC 15504 Information technology — Process assessment
• ISO 15614 Specification and qualification of welding procedures for metallic materials — Welding procedure test
• ISO 15686 Buildings and constructed assets — Service life planning
• ISO/IEC 15693 Identification cards — Contactless integrated circuit cards — Vicinity cards
• ISO 15706 Information and documentation — International Standard Audiovisual Number (ISAN)
• ISO 15707 Information and documentation — International Standard Musical Work Code (ISWC)
• ISO 15836 Information and documentation — The Dublin Core metadata element set
• ISO/IEC 15897 Information technology — Procedures for registration of cultural elements
• ISO 15924 Information and documentation — Codes for the representation of names of scripts
• ISO 15930 Graphic technology — Prepress digital data exchange using PDF^{[Note 3]}
• ISO/IEC 15948 Information technology — Computer graphics and image processing — Portable Network Graphics (PNG): Functional specification
• ISO 15970 Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor
• ISO 15971:2008 Natural gas — Measurement of properties — Calorific value and Wobbe index
• ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
• ISO 16232 Road vehicles — Cleanliness of components of fluid circuits
  • ISO 16232-8 Particle nature determination by microscopic analysis
  • ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
  • ISO 16232-10 Expression of results
• ISO/IEC 16262 Information technology — Programming languages, their environments and system software interfaces — ECMAScript language specification
• ISO/IEC 16500 Information technology — Generic digital audio-visual systems
• ISO 16549 Textiles — Unevenness of textile strands — Capacitance method
• ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronic equipment
• ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
• ISO/TR 16982:2002 Ergonomics of human-system interaction — Usability methods supporting human-centred design
• ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection
• ISO/IEC 17024:2003 Conformity assessment — General requirements for bodies operating certification of persons
• ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories
• ISO 17202 Textiles — Determination of twist in single spun yarns — Untwist/retwist method
• ISO 17776 Petroleum and natural gas industries — Offshore production installations — Guidelines on tools and techniques for hazard identification and risk assessment
• ISO 17894 Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications
• ISO/IEC 18000 Information technology — Radio frequency identification for item management
  • ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
  • ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
  • ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
  • ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
  • ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
  • ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
• ISO/IEC 18004 Information technology — Automatic identification and data capture techniques — QR Code 2005 bar code symbology specification
• ISO/IEC 18009 Information technology — Programming languages — Ada: Conformity assessment of a language processor
• ISO/IEC 18013 Information technology — Personal identification — ISO-compliant driving license
  • ISO/IEC 18013-1:2005 Physical characteristics and basic data set
  • ISO/IEC 18013-2:2008 Machine-readable technologies
  • ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
• ISO/IEC 18014 Information technology — Security techniques — Time-stamping services
• ISO/IEC 18023 Information technology — SEDRIS
  • ISO/IEC 18023-1:2006 Functional specification
  • ISO/IEC 18023-2:2006 Abstract transmittal format
  • ISO/IEC 18023-3:2006 Transmittal format binary encoding
• ISO/IEC 18024-4:2006 Information technology — SEDRIS language bindings — Part 4: C
• ISO/IEC 18025:2005 Information technology — Environmental Data Coding Specification (EDCS)
• ISO/IEC 18026 Information technology — Spatial Reference Model (SRM)
• ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
  • ISO/IEC 18033-1 General
  • ISO/IEC 18033-2 Asymmetric ciphers
  • ISO/IEC 18033-3 Block ciphers
  • ISO/IEC 18033-4 Stream ciphers
• ISO/IEC 18041-4 Information technology — Computer graphics, image processing and environmental data representation — Environmental Data Coding Specification (EDCS) language bindings — Part 4: C
• ISO/IEC 18042-4:2006 Information technology — Computer graphics and image processing — Spatial Reference Model (SRM) language bindings — Part 4: C
• ISO/IEC 18092 Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)
• ISO/TS 18152 Ergonomics of human-system interaction — Specification for the process assessment of human-system issues
• ISO 18185 Freight containers — Electronic seals
• ISO 18245 Retail financial services — Merchant category codes
• ISO/TR 18529:2000 Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions
• ISO 18629 Industrial automation systems and integration — Process specification language
• ISO 19005 Document management — Electronic document file format for long-term preservation
• ISO 19011 Guidelines for quality and/or environmental management systems auditing
• ISO 19092 Financial services — Biometrics — Security framework
• ISO 19101 Geographic information — Reference model
• ISO/TS 19103 Geographic information — Conceptual schema language
• ISO/TS 19104 Geographic information — Terminology
• ISO 19105 Geographic information — Conformance and testing
• ISO 19106 Geographic information — Profiles
• ISO 19107 Geographic information — Spatial schema
• ISO 19108 Geographic information — Temporal schema
• ISO 19109 Geographic information — Rules for application schema
• ISO 19110 Geographic information — Methodology for feature cataloguing
• ISO 19111 Geographic information — Spatial referencing by coordinates
• ISO 19112 Geographic information — Spatial referencing by geographic identifiers
• ISO 19113 Geographic information — Quality principles
• ISO 19114 Geographic information — Quality evaluation procedures
• ISO 19115 Geographic information — Metadata
• ISO 19116 Geographic information — Positioning services
• ISO 19117 Geographic information — Portrayal
• ISO 19118 Geographic information — Encoding
• ISO 19119 Geographic information — Services
• ISO/TR 19120 Geographic information — Functional standards
• ISO/TR 19121 Geographic information — Imagery and gridded data
• ISO/TR 19122 Geographic information / Geomatics — Qualification and certification of personnel
• ISO 19123 Geographic information — Schema for coverage geometry and functions
• ISO 19125 Geographic information — Simple feature access
• ISO 19126 Geographic information — Feature concept dictionaries and registers
• ISO/TS 19127 Geographic information — Geodetic codes and parameters
• ISO 19128 Geographic information — Web map server interface
• ISO/TS 19129 Geographic information — Imagery, gridded and coverage data framework
• ISO/TS 19130 Geographic information — Imagery sensor models for geopositioning
• ISO 19131 Geographic information — Data product specifications
• ISO 19132 Geographic information — Location-based services — Reference model
• ISO 19133 Geographic information — Location-based services — Tracking and navigation
• ISO 19134 Geographic information — Location-based services — Multimodal routing and navigation
• ISO 19135 Geographic information — Procedures for item registration
• ISO 19136 Geographic information — Geography Markup Language (GML)
• ISO 19137 Geographic information — Core profile of the spatial schema
• ISO/TS 19138 Geographic information — Data quality measures
• ISO/TS 19139 Geographic information — Metadata — XML schema implementation
• ISO 19141 Geographic information — Schema for moving features
• ISO 19142 Geographic information — Web Feature Service
• ISO 19143 Geographic information — Filter encoding
• ISO 19144 Geographic information — Classification systems
• ISO 19146 Geographic information — Cross-domain vocabularies
• ISO 19439 Enterprise integration — Framework for enterprise modelling
• ISO 19440 Enterprise integration — Constructs for enterprise modelling
• ISO/IEC 19501 Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2
• ISO/IEC 19502 Information technology — Meta Object Facility (MOF)
• ISO/IEC 19503 Information technology — XML Metadata Interchange (XMI)
• ISO/IEC 19757 Information technology — Document Schema Definition Languages (DSDL)
  • ISO/IEC 19757-2 Regular-grammar-based validation — RELAX NG
  • ISO/IEC 19757-3 Rule-based validation — Schematron
  • ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
• ISO/IEC 19770 Information technology — Software asset management
• ISO/IEC 19785 Information technology — Common Biometric Exchange Formats Framework
• ISO/IEC 19790 Information technology — Security techniques — Security requirements for cryptographic modules
• ISO/IEC 19794 Information technology — Biometric data interchange formats
  • ISO/IEC 19794-1:2011 Framework
  • ISO/IEC 19794-2:2005 Finger minutiae data
  • ISO/IEC 19794-3:2006 Finger pattern spectral data
  • ISO/IEC 19794-4:2005 Finger image data
  • ISO/IEC 19794-5:2005 Face image data
  • ISO/IEC 19794-6:2005 Iris image data
  • ISO/IEC 19794-7:2007 Signature/sign time series data
  • ISO/IEC 19794-8:2006 Finger pattern skeletal data
  • ISO/IEC 19794-9:2007 Vascular image data
  • ISO/IEC 19794-10:2007 Hand geometry silhouette data

ISO 20000–ISO 29999

• ISO/IEC 20000 Information technology — Service management
• ISO 20022 Financial services — UNIversal Financial Industry message scheme
• ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
  • ISO/IEC TR 20943-1:2003 Data elements
  • ISO/IEC TR 20943-3:2004 Value domains
• ISO/IEC 21000 Information technology — Multimedia framework (MPEG-21)
• ISO/IEC 21481 Information technology — Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol -2 (NFCIP-2)
• ISO 21482 Ionizing-radiation warning — Supplementary symbol
• ISO 22000 Food safety management systems — Requirements for any organization in the food chain
• ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
• ISO 22093 Industrial automation systems and integration — Physical device control — Dimensional Measuring Interface Standard (DMIS)
• ISO 22241 Diesel engines — NOx reduction agent AUS 32
  • ISO 22241-1 Quality requirements
  • ISO 22241-2 Test methods
  • ISO 22241-3 Handling, transportation and storing
• ISO/IEC TR 22250 Information technology — Document description and processing languages — Regular Language Description for XML (RELAX)
  • ISO/IEC TR 22250-1:2002 RELAX Core
• ISO/PAS 22399:2007 Societal security — Guideline for incident preparedness and operational continuity management
• ISO 22716:2007 Cosmetics — Good Manufacturing Practices (GMP) — Guidelines on Good Manufacturing Practices
• ISO/IEC 23003 Information technology — MPEG audio technologies
  • ISO/IEC 23003-1 MPEG Surround
  • ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
• ISO/IEC 23270 Information technology — Programming languages — C#
• ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
  • ISO/IEC 23360-1 Generic specification
  • ISO/IEC 23360-2 Specification for IA32 architecture
  • ISO/IEC 23360-3 Specification for IA64 architecture
  • ISO/IEC 23360-4 Specification for AMD64 architecture
  • ISO/IEC 23360-5 Specification for PPC32 architecture
  • ISO/IEC 23360-6 Specification for PPC64 architecture
  • ISO/IEC 23360-7 Specification for S390 architecture
  • ISO/IEC 23360-8 Specification for S390X architecture
• ISO 23733 Textiles — Chenille yarns — Test method for the determination of linear density
• ISO 23950 Information and documentation — Information retrieval (Z39.50) — Application service definition and protocol specification
• ISO/IEC 24707:2007 Information technology — Common Logic (CL): a framework for a family of logic-based languages
• ISO/IEC 24727 Identification cards — Integrated circuit card programming interfaces
  • ISO/IEC 24727-1 Architecture
  • ISO/IEC 24727-2 Generic card interface
  • ISO/IEC 24727-3 Application interface
  • ISO/IEC 24727-4 Application programming interface (API) administration
  • ISO/IEC 24727-5 Testing procedures
  • ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
• ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
• ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information and communications technology disaster recovery services
• ISO 26000 Guidance on social responsibility
• ISO/IEC 26300 Information technology — Open Document Format for Office Applications (OpenDocument) v1.0
• ISO/IEC 27000 Information technology — Security techniques — Information security management systems — Overview and vocabulary
• ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements
• ISO/IEC 27002 Information technology — Security techniques — Code of practice for information security management
• ISO/IEC 27003 Information technology — Security techniques — Information security management system implementation guidance
• ISO/IEC 27004 Information technology — Security techniques — Information security management — Measurement
• ISO/IEC 27005 Information technology — Security techniques — Information security risk management
• ISO/IEC 27006 Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems
• ISO/IEC 27011 Information technology — Security techniques — Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
• ISO/TS 27687:2008 Nanotechnologies — Terminology and definitions for nano-objects — Nanoparticle, nanofibre and nanoplate
• ISO 28000 Specification for security management systems for the supply chain
• ISO 28003 Security management systems for the supply chain — Requirements for bodies providing audit and certification of supply chain security management systems
• ISO 28004 Security management systems for the supply chain — Guidelines for the implementation of ISO 28000
• ISO/IEC 29500 Information technology — Document description and processing languages — Office Open XML File Formats
  • ISO/IEC 29500-1 Fundamentals and Markup Language Reference
  • ISO/IEC 29500-2 Open Packaging Conventions
  • ISO/IEC 29500-3 Markup Compatibility and Extensibility
  • ISO/IEC 29500-4 Transitional Migration Features

ISO 30000–ISO 39999

• ISO 30000:2009 Ships and marine technology — Ship recycling management systems — Specifications for management systems for safe and environmentally sound ship recycling facilities
• ISO 31000 Risk management — Principles and guidelines
• ISO 32000 Document management — Portable document format
• ISO/IEC 38500 Corporate governance of information technology

ISO 80000

• ISO/IEC 80000 Quantities and units
• ISO/TS 80004 Nanotechnologies — Vocabulary
  • ISO/TS 8004-1 Core terms
  • ISO/TS 8004-3 Carbon nano-objects
  • ISO/TS 8004-4 Nanostructured materials
  • ISO/TS 8004-5 Nano/bio interface
  • ISO/TS 8004-7 Diagnostics and therapeutics for healthcare

See also

• International Classification for Standards
• List of ASTM International standards
• List of DIN standards
• List of EN standards
• List of IEC standards

Notes

1. ^ This list generally excludes draft or withdrawn versions.
2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
3. ^ ^{a b c d e f g h i j k l} The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

External links

• International Organization for Standardization